Network Equipment

• Material: S45C
• HRC: 45±3°
• Handle:Green: P.P. Black: T.P.R
• Application: 4P/6P/8P
• Convenience: Easy to operate

• Designed to international safety standard IEC1010-1 CAT III 600V
• Non-contact testing
• Voltage sensitivity: 100 to 240 V AC
• Frequency: 50/60Hz
• Detection distance: < 5”
• Operating temperature: 32°F to 122°F (0°C to 55°C)

The MT-7068 All-in-one Toner & probe Kit lets you use Toner and Probe to validate and troubleshoot wiring on RJ11/RJ45 cables and connectors, USB, F, BNC, and RCA connectors, and it also supplied with alligator clips to work with. It is ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling , etc.

• Case size: 340x250x65(mm)
• The contents list is available at "Detail"

Mastech MS6810 Cable Tester - multi-functional network cable tester is widely used for coaxial cable (BNC), UTP and STP cable checks. It can automatically check for open circuits, shorts, miswires, and reversals. Just connect RJ45 or BNC cable to the tester, and switch it on, it will tell you if the cable is correctly wired. If the cable is shielded, you may check the shield's integrity

The device consists of the tester block and detachable terminal. While not in operation, the detachable terminal is fixed to the tester block. The device comes with a nylon carrying bag.

Mastech MS6811 is a small hand-held network cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables.

Features:

• Test device used with UTP (Unshielded Twisted Pare) and STP (Shielded Twisted Pair) wiring.
• Checks continuity and configuration of wiring with unshielded and shielded modular plugs.
• Tests for open circuits, shorts, miswires, reversals and split pairs and cable shield integrity .
• Detachable main unit and remote terminal allow one person to test T568A, T568B, 10Base-T and Token Ring.
• Quick debugging by identifying which cable pairs have a specific wiring fault.

Designed specially for telecom installers, network and cable television engineers. A considerate way for carrying tools inside the firm ABS tool case provides convenience to installers. Master Telecom Installation and Service Kit PK-4023BM is the best choice for telecommunication professionals.

Metal Detector 3-in-1 Pro'sKit NT-6351 detects metal pipes, cables and wooden studs behind the paneling, plywood and flooring up to 3/4 inch (2 cm) thick.

• OAL: 200 mm
• Material: S45C
• HRC: 45±3°
• Handle: PVC
• Application: RJ45/8P, RJ11/6P
• Replacement blade No: 508-376E-B (2pcs/pack)
  
  

The Pro’sKit NT-3200 Mini tester with various adaptors works with coaxial cable F-connectors.
With the the wide range of optional adapters included, you can test telephone, LAN, audio, security, or virtually any other type of wire or cable easily.

NT-3200 is not only easy to use but also fully powered with functional features. The NT-3200 contains NT-302 Cable mini tester which has the improved head design with rugged push-on male F-connector and time-saving push-on female connector on audible toner.

The loud sound of detachable tone detector makes NT-3200 ideal for working in noisy environments. Better yet, its compact size makes NT-3200 convenient to carry and store. Supplied in a soft PVC case for the kit storage.

The system checks DC continuity and has a DC generator /short detector with easily viewable short circuit LED indicator and a removable tone detector that screws into the base.

• Fastest display
• Easiest operation
• The most cost-effective solution
• Automatic turning to power-saving mode
• Power on & battery low indicator
• Peak wavelength: 1300 nm
• Fiber core: 62.5 / 125 µ

• Fastest display
• Easiest operation
• The most cost-effective solution
• Automatic turning to power-saving mode
• Power on & battery low indicator
• Peak wavelength: 1300 nm
• Fiber core: 62.5 / 125 µ

Strips 125 micron glass fiber with 250 micron buffer coating without scratching or nicking glass fiber.

• Material: S50C
• HRC: 48±2